traditional furniture

Shoe Shine Stand with Drawer for Singapore Shoe Shine Uncle

DSC_1159 DSC_1115 DSC_1120 DSC_1123 DSC_1132 DSC_1133 DSC_1134 DSC_1135 DSC_1136 DSC_1137 DSC_1138 DSC_1140 DSC_1142 DSC_1143 DSC_1145 DSC_1157 DSC_1158 DSC_1159
Advertisements

Balcony Table and Stool Set for Sale in Singapore

One table and two stools

Greene and Greene inspired table and stool set

This beautiful and unique table and stool set was inspired by the cloud lifts of Greene and Greene furniture. This piece is made from solid Burmese Teak which is a strong and lasting wood. It’s nice golden brown adds warmth to any room. The combination of good quality teak with the beauty of G&G cloud lifts  has a special grace that beckons you to sit and have coffee. The legs are inlayed with purpleheart which gives a nice complement to the golden brown teak wood. The joints at the legs are solid mortise and tenon joinery. All surfaces are rounded and hand sanded to 240 grit making the edges inviting to touch.

Dimensions
The table is 710mm high and has a top 595mm in diameter.
The stool is 460mm high and 335mm in diameter.

Price
Table: S$600
Stool: S$400
Entire set: $1400
Please note that this is NOT outdoor furniture. Do NOT use in wet weather.

Stool with nice wood grain

Teak wood, nice grain

Stool with clould lifts

Note the shape of the legs

DSC_0441

Cloud lift

Cloud lift

Cloud lift

Table with view of grain

Like the wood grain of the table top

Table top showing wood grain

Like the wood grain of the table top

Table with legs

Can you see the Purpleheart inlay?

Set of table and stool

Isometric view

Side view

Side view

Table and stool set taken from a lower angle

Photo taken from a lower angle

DSC_0426 DSC_0425 DSC_0424 DSC_0423 DSC_0422 DSC_0421 DSC_0420
Burmese Teak Stool and Table Set. Price: $1400

Burmese Teak Stool and Table Set. Price: $1400

DSC_0415 DSC_0414
Table and stool with cloud lift pattern

Note the Greene and Greene inspired cloud lift pattern

Nice balcony table and stool

Will look good in your balcony

top view of table and stool

Top view

Picture of table and stool set taken from a low angle

Front view

One table and two stools

Greene and Greene inspired table and stool set

This slideshow requires JavaScript.

Table for Easter Baptismal Font in Singapore

IMG_0515Cloud lift on undersidetable legsUnderside of table Purple heart edgingTable from the front

The above are clearer pictures of the baptismal font that I made in my previous post: Easter Church Furniture. A bowl is placed on top of the table to collect the water.

Plans are underway to improve the table such as a self draining wooden bowl to match the table. Front and side pannels with baptismal related icons (dove coming down onto water) are also in the plans. So stay tune.

It is a table approx 33 inches in height and a diameter of 14 inches. The difference from previous stool design (the prototype) is that the legs are an inch larger than the diameter of the top. The previous design places the legs in the same vertical plane as the top. This design is more stable than the prototype.

I’ve also added cloud lift to the stretchers under the top for visual interest. The bottom stretch was intentionally left flat so that a shelf can be installed in future. The future plan is to add side covering and conceal some form of container to collect the run off water from the self emptying bowl on top.

Greene and Greene inspired stool prototype

wooden sool 399

This year’s woodworking workplan include a set of 2 stools and a tea table.  Also on my list is a set of bathroom medicine cabinet and vanity. So keep a lookout for my post on my bathroom furniture.

The above photos show the prototype of the stool which I intend to make this year. The actual product will be made of Burmese Teak. The stool measures 45cm (17.7 inches ) high  and 35.5 (14inches) in diameter while the table will be 80cm (31.5 inches) high and 50cm (19.5 inches) in diameter .

I would like feedback on the design. Ignore the workmanship and finishing this time. This is only a prototype and I do not intend to waste time sanding and finishing it. The main purpose is to try out the stability and comfort of the final product.

Thank you for giving your comments on the design.

Greene and Greene inspired wall cabinet in Singapore

The cloud lift details

The cloud lift details, the shinny thing on the door are screws

Tool cabinet isometric view

Tool cabinet

Tool cabinet with tools

Tool cabinet with 2 shelves

Bottom shelf holding tool rack

Rack for screwdrivers. Spokeshaves hang from the top.

Top shelf

2 shelves for my planes

Chisel holder for 6 chiscels

Chisel rack

Proud finger joint

Proud finger joint. I got lazy and omited the square pegs. Will put them in when I feel like it.

Tool cabinet hanging on the wall above workbench

In the grand scheme of things

This is a Greene and Greene inspired wall cabinet which I use to house my tools.

I built this with the intention of practicing for a bathroom medicine cabinet. After I built this, I soon realised that it may not be practical for a medicine cabinet. Firstly, I don’t quite like the idea of placing wet toothbrushes inside a cabinet. Secondly, while the mirror is quite big in size (so that I can still see the top half of my body should I grow fat), it cannot be too low down near the tap. So this design and size would probably not do if it’s intended for a medicine cabinet.

Like my other pieces of furniture, I use Kapur wood. The carcass is a meter long while the breath is about 60 centemeters wide. The joints for the carcass is proud finger joints in line with the Greene and Greene theme. They are held by glue and screws. Rightfully, the screw heads are hidden by pegs; but since this is workshop furniture, I got lazy and put off doing the pegs. The shelves are dadoed into the sides. The carcass is held up by wooden bars that are screwed to the top and bottom via pocket holes. These wooden bars are then screwed to the wall.

The shape of the door rails were cut onto plywood to make a template. The wood was then routed on a router table. The rails are held in the stilts with mortise and tennon joinery. To make it stronger, screws are driven into the rails from the sides of the stiles. These are then covered with dowels.

A plywood pannel with white PVC is fitted into the door held by dado. This can be replaced by a mirror in place of the plywood.

A chisel and screw driver rack was then fabricated and fixed into the cupboard. I placed the entire cupboard onto adjustable supports before screwing it to the wall. A sprit level mskes the task more accurate.

Please feel free to leave any comments you like. It helps me learn, and for your benefit, most would agree that teaching others is the best way to learn. So do participate. Type in a line or two, so this blog would be more useful to those who visit.

Why I prefer solid wood furniture.

I realized that there is a lack of good furniture and cabinets today. There are many factory produced low quality furniture which may appear cheap and affordable. Many of them are constructed from compressed wood chips which self destruct when they come in contact with moisture. They are also generally not durable. Ultimately, it would be more value for money to buy quality furniture that last, than to be constantly changing furniture. Many would argue that you’ll constantly have new furniture at home, but why buy furniture with the intent of throwing it away?

Cabinets and furniture today are covered by a paper or foil laminate giving the place an artificial plastic feel. The use of laminate enables the designer to set a style by using colours to make the room brighter or give it a slick sophisticated modern look. But these lack the warmth that is much needed to turn a house into a home. Solid wood furniture brings with it a natural warmth that makes the room cosy, relaxing and inviting. No spa resort would use plastic chairs, why would I do so in my home?

Furniture made of solid wood will last a long time. Well constructed solid wood furniture can be expected to last more than a hundred years. It may be a bookcase I give to my children at a significant milestone of their lives, such as entering university, and they’ll use it, show it and talk about it to their children and grandchildren. These may also be antiques in future.

I custom make my furniture. Off the shelf factory produced solid wood furniture are quality controlled to be of the same shade and colour, and generally of the same design and the same type of wood. Buy a few of these and we’ll feel like we live in a furniture store. Custom made furniture allow some variation with the natural wood tone and grain pattern. To relax, would you go to the seaside to watch boats of different size and colour or a carpark filled with shinny new cars of the same colour? For me, its the former, why would I decorate my home like a carpark?

Custom made furniture maximizes space. Space is expensive in Singapore today. A piece of furniture 10 centimeters  short is 10 centimeters of expensive air. 10 centimeters could be the thickness of 5 books, multiply it by the number of shelves in a bookcase and you’ll realize what you are wasting.

The problem with today’s furniture is the lack of good quality solid wood furniture which makes the home warm, inviting and relaxing; a heaven to return to after a day’s work, yet economical in the long run. Custom made furniture provides sufficient variation to make the room interesting and maximises the use of space.   That’s why I prefer to make my own furniture.